Knock on the blackboard to draw the key points. You need to know all these problems that should be paid attention to when using tile glue!

2023-11-18 10:51:31



It is often said that "three points are doomed and seven points depend on hard work". Many facts illustrate this point. However, many do not represent all. In the decoration industry, in order to ensure the firmness and durability of ceramic tile paving, there is no doomed or hard work here. There are only "big brands, good materials and fine construction, all of which cannot be less".

Big brands mean that quality is guaranteed and after-sales is guaranteed, which can effectively reduce quality risks. Good materials determine good projects, good materials, natural and environmentally friendly decoration with quality; Fine construction means that craftsmen can use extreme details to create high-quality engineering projects. Therefore, for the decoration industry, big brands, good materials, and fine construction are indeed the same.

good material

Tile glue is called tile adhesive. It is mainly used for pasting decorative materials such as marble, natural stone, thin plate, large plate, antique brick, rock plate, etc. It can be directly applied to concrete, cement plaster, concrete slab, plastering brick surface and Some waterproof coatings. Because of the characteristics of strong adhesion, long drying, good aging resistance and convenient construction, tile adhesive has become an ideal material for modern tile pasting.

fine construction

Although tile glue can greatly reduce the hollowing and shedding of ceramic tiles, tile glue is not free to use. It has certain requirements for the construction process. Therefore, in order to ensure that the tile paving is not empty and does not fall off, we must pay attention to the following issues when using tile glue for tile paving:

  1

base surface

Firm, smooth, clean and matching are the four major elements of the base surface: first, the base surface is not firm, and the tile glue is easy to pull off the surface layer; Second, the flatness of the base surface affects the structural stress performance of tile bonding. Third, debris such as scale, laitance, release agent, oil stain and dust on the base surface will affect the bonding strength of tile adhesive. Fourth, the base surface of polyurethane, asphalt and other oily waterproof layer must be eradicated, because these oily waterproof coating will reduce the bonding strength of tile glue. If these four elements are not handled properly, the tiles will be empty and fall off. Therefore, when using tile glue, we need to do a good job in the treatment of the base surface before pasting tiles.

  

 

2 Brick back

The back of the tile is often due to production, storage, transportation and other issues, there will be different degrees of dust, dust, release agent and other substances, if you do not remove the dirt on the back of the decorative tile, it will affect the bonding effect of the tile adhesive.

  

 

3 mixed with cement, sand

Tile glue is a well-proportioned finished product. There is no need to add any products during use. If cement, sand and other substances are added, the product proportion of tile glue will be destroyed, thus the later construction effect cannot be guaranteed.

  

 

4 shovel mixing

Whether it is ceramic tile glue, curing glue, liquid coiled material or boma glue, it needs to be stirred with an electric mixer. If it is stirred with a shovel, it will cause uneven stirring, or there will be too much water addition, rapid loss of effective ingredients, etc. These conditions will lead to a decrease in the bonding force of ceramic tile glue.

5. The active ingredients of the tile adhesive have already undergone chemical reactions when it is disassembled for too long. The longer the exposure time in the air, the lower the bonding strength in the later period. Water addition can only change the operating performance. Therefore, the tile adhesive should be used with stirring, the use time should be controlled within 2 hours, and should be discarded immediately after drying.

6 uneven application when using tile glue, if the application is uneven, there will be gaps. the larger the gap, the greater the shrinkage force of the material in the drying process, which will cause the tile to be hollowed or the tile to fall off. therefore, when using tile glue, we need to stick tiles by double-sided sizing and fully kneading and pressing, so as to reduce hollowing and avoid falling tiles.

  

 

7 The thicker the tile glue is applied, the greater the acting force generated by dry curing shrinkage, and the excessive shrinkage stress will affect the stability of the tile on the wall, resulting in an increase in the probability of tile hollowing and falling off in the later period.

  

 

Then the question arises, is there a brand of ceramic tile glue that is green, environmentally friendly, convenient and fast in construction, and can ensure that it does not empty or drop bricks?

big brand

Paste stable large plate ceramic tile glue, master the core technology of large plate paving-anti-falling technology, compound high carbon fiber in the material, make ceramic tile and wall surface bond into a mesh structure, stick large plate, rock plate ceramic tile and base surface in all directions, thus enhancing the viscosity and durability of ceramic tile glue, providing super anchoring and pasting effect for large plate and rock plate ceramic tile, and making the world's large plate and rock plate ceramic tile safer and more stable. Let life be better because of the big board and rock board, let the big board and rock board be more assured because they are pasted steadily, and the big board and rock board tiles are pasted steadily.