The correct use of tile glue, you need to know!
2023-11-22 14:19:34
I believe that friends who have been decorated are no strangers to ceramic tiles. In my impression, most of the ceramic tiles are pasted with cement mixture, but it is easy to cause the tiles to be empty and fall off. Tile glue is a new type of modern decoration material instead of traditional cement yellow sand. Its good flexibility prevents the production of empty drum and can avoid the risk of falling bricks.
So what is the use of tile glue?
Today, brother Wen will bring you the construction method of tile glue and the correct use method of tile glue in daily construction.
01
# How to use tile glue
1
Clean the back of the pre-selected tiles and check the paste base surface. The base surface should be firm, smooth, clean, no pollution, loose matter, empty drum, etc. If the base surface is not firm and uneven, it should be repaired with cement mortar in advance.
2
Clean the back of the pre-selected tiles and check the paste base surface. The base surface should be firm, smooth, clean, no pollution, loose matter, empty drum, etc. If the base surface is not firm and uneven, it should be repaired with cement mortar in advance.
3
Use professional tools to scrape the glue evenly on the work surface, and scrape about 1 square of the construction surface in each batch.
4
Use tools to evenly scrape the glue on the base surface and the back of the ceramic tile before tiling operation. Pay attention to remove the dust on the back of the ceramic tile first.
5
Rub and press the tiles on the base surface by hand, or use a rubber hammer to adjust the parallelism of the tiles. It is recommended to use a level ruler and a cross for tiling.
6
Clean the tiles and wait 24 hours for caulking.
02
# Precautions for the use of tile glue
1
The suitable construction temperature is 5~40 ℃, and the verticality and flatness of the substrate shall be confirmed before construction.
2
Do not add water to mix the dried paste and reuse it. The residual paste on the brick surface should be cleaned up with slightly wet sponge in time.
3
Protection from rain, sun exposure and frost for at least 12 hours after construction.
4
Used for old ceramic tile or stone surface, as well as gypsum board and other base surface paste should be confirmed before the original base surface adhesion strength and wall firmness, must be in large area before construction paste test before use.
Recent news
Contact Us
Marketing Center:
No. 7-8-9, Block A21, No. 78 Ji Hua West Road, Chancheng District, Foshan City, Guangdong Province
Production base:
Xiaodong Industrial Park, Genghe Town, Gaoming District, Foshan City, Guangdong Province
Website: www.tiedewen.com
National Service Hotline:
Focus on us
WeChat Public Number
Douyin Official Media
Flagship Micro Mall
3D Virtual Pavilion
WeChat Public Number
WeChat Public Number
WeChat Public Number
Copyright 2023 TDW All rights reserved | Rock slab tile adhesive | Top 10 brands of tile adhesive | Tile adhesive first-line brand